Your meters aren’t the problem. It’s what you’re missing in between.
Many manufacturers believe they have a solid grasp on their energy performance. After all, they're monitoring bills, checking site dashboards, and tracking a few key KPIs. But here’s the uncomfortable truth: your energy data might be lying to you.
Inaccurate, incomplete, or outdated energy information can create blind spots that cost thousands—if not millions—every year. Let's break down why.
Most organizations rely on monthly utility bills or site-wide energy management dashboards. But these provide only an aggregate view. They tell you how much you're spending, not where or why.
Without system-level submetering—on boilers, chillers, air compressors, and production lines—you can't pinpoint inefficiencies. A factory with a €1M annual energy bill might have one faulty compressor quietly eating 15% of the budget. Monthly bills would never reveal that.
Fix it:
Deploy submetering at key energy-consuming systems.
Focus on asset-level visibility, not just site-level.
The return on investment becomes clear as organizations identify waste, prevent equipment failures, and maintain compliance with energy standards. For both new construction and existing facilities, proper energy monitoring serves as an essential tool for engineering managers focused on operational excellence.
Energy leaks and inefficiencies often occur between reporting periods. If you're reviewing monthly or even weekly reports, you're too late.
Real-time anomalies like:
A stuck open steam trap
A failing chiller control loop
An over-cycling air compressor
can cost thousands within a few days.
Fix it:
Implement real-time dashboards.
Set up automated alerts for abnormal behavior (temperature drift, pressure loss, unexpected runtimes).
Energy usage without context is just noise. You need to normalize against:
Production output (kWh per unit produced)
Ambient temperature (for HVAC)
Shift schedules
Seasonal patterns
Without this, a "high" usage month might actually be efficient—or a "normal" month might hide significant waste.
Fix it:
Link energy KPIs to operational data (SCADA, MES, BMS systems).
Measure energy intensity, not just total consumption.
Even after a successful retrofit or commissioning project, performance drifts over time. Pumps wear down. Controls fall out of tune. Sensors go out of calibration.
If you aren't tracking performance against a "golden state" baseline, you won't see that a once-optimized asset is now costing 10% more energy to do the same job.
Fix it:
Baseline new projects immediately after implementation.
Monitor for performance drift quarterly.
Energy, maintenance, operations, and finance teams often look at different slices of energy data, each filtered for their needs. No one sees the whole picture.
This fragmentation leads to:
Missed early warnings
Misaligned priorities (OPEX vs. CapEx)
Poor investment decisions
Fix it:
Consolidate energy data into a unified platform.
Ensure cross-functional teams have access and visibility.
Blind spots are everywhere. Here are common culprits:
Oversized and inefficient boilers
Unmonitored compressed air leaks
Poorly tuned HVAC systems
Inefficient lighting in low-traffic zones
Equipment left running during non-production hours
Spotting these early can save significant costs without major CapEx investments.
Our platform provides:
Real-time, system-level visibility
Automated drift detection
Contextual insights linked to production and climate data
Cross-team dashboards and reporting
Your energy data doesn't have to lie to you anymore. Ready to uncover your energy blind spots? Book a Consultation with CoolPlanet.